KM/CPR480S Fully automatic computer CPR Manikin

CPR manikin function:

1. The pupil is displayed by LCD, which can simulate the constriction, normal and dilated state of the pupil. The pupil dilated in the rescue state, and the pupil narrowed and the light reflex recovered after the rescue.
2. Manikin’s upper limb joint free movement. (front, back, extension, flexion, inside, outside; The wrist and elbow joint can be flexed, extended and extended.) the shoulder joint of the model can be flexed, extended and rotated.
3. Equipment fault self-check function: after starting up, the equipment will automatically enter the self-check program to check whether there is a fault. If there is a fault, the voice prompts the user to timely maintain.

4.The key operation adopts fault-tolerant technology, and there are voice prompts for key operation errors to avoid users' wrong operation.

Compression chest rebound insufficient detection, and voice prompt users:
1. Simulated vital signs:
1). Initial state: The carotid artery pulsed, mimicking a normal pupil.
2). In the process of pressing: The passive pulse of human carotid artery was simulated and the pulse frequency was the same as the compression frequency.
3). After successful rescue: The carotid artery pulsed autonomously, the pupil was narrowed and the light reflex was restored.
2. Standard airway can be opened and the airway indicator is on.

3. Perform manual chest compressions and mouth-to-mouth breathing. Electronic monitoring of airway opening and compression sites shows correct and incorrect number of mouth-to-mouth and cardiac compressions.

1). Press depth: 5cm-6cm.

2). Press frequency: 100-120 beats/min.

3). Compression-to-ventilation ratio: 30:2.

4). Tidal volume ratio: 500ml~1000ml.
4. Three working modes to choose: CPR Training; Exam; Actual combat.
1). Method 1: CPR training with compressions and blowing.
2). Method 2: exam mode, according to the 2015 international cardiopulmonary resuscitation standard, the ratio of pressure and blowing 30:2 was used to complete 5 cycle operations within the prescribed time, and the score will be printed and automatic scoring.

3). Method 3: actual combat, set the operating time range and cycle times by yourself, and complete the assessment standards set in the early stage according to the international cardiopulmonary resuscitation standards in 2015. And can print score by the printer.
CPR manikin function:
1. Electronic monitoring: Electronic monitoring of airway opening and compression sites, showing the correct and incorrect times of artificial respiration and extracardiac compressions.

2. Voice prompts: full voice prompts during training and assessment, voice can be turned on and off, and volume can be adjusted.
3. Operating time: measured in seconds.
4. Operating frequency: 100-120 times/min.
5. Power supply state: 220V power supply is adopted, and the output power supply is 12V after voltage stabilization by stabilizer.
Printing function:
1. After training, examination and actual combat, you can print the result such as press and blow correct and wrong times, wrong reasons, required operation time, etc. There are two types of printing, short printing records the whole process of pressing and blowing results, comprehensive judgment score; Long print covers short print based on the display of press and blow waveform.

2. Before the operation, first check the print outlet, print paper is exposed to the print, if not, press the print button, can print paper out of the print, so as to finish the operation smoothly printed. Replace the printing paper, you can open the cover, take out the printer, replace the printing paper.

Packing size：95*35*57CM ，G.W.23KG.